Support Thread: Setting the Lat/Long Values in GUI for Measuring Magnetic Heading on AHRS
Purpose: The purpose of this support article is to help the user configure the AHRS to read magnetic heading.
Last Updated: November 2019
Support Thread: Possible Break Condition AHRS-II-P/INS/MRU
Purpose: The purpose of this article is to help diagnose an accidental break condition. This same situation is capable of occurring for both INS models and MRU models.
Last Updated: July 2019
Support Thread: Possible Break Condition AHRS-II-P/INS/MRU Read More »
Summary of Aiding Data Features for INS
Purpose: To highlight the benefits and limitations of using aiding data for the Inertial Labs Inertial Navigation System (INS).
Last Updated: February 2020
Summary of Aiding Data Features for INS Read More »
Software Development Kit (SDK) for INS, MRU, and AHRS-II
Purpose: This SDK applies to all models of the Inertial Labs Inertial Navigation System (INS), Motion Reference Unit (MRU), and Attitude and Heading Reference System (AHRS-II).
Last Updated: November 2019
Software Development Kit (SDK) for INS, MRU, and AHRS-II Read More »
Requesting Additional Logs from Receiver for INS
Purpose: To instruct on how to request additional logs from the internal receiver on the INS.
Last Updated: Aug 19, 2020
Requesting Additional Logs from Receiver for INS Read More »
Regular Versus High Resolution Data
Purpose: Learn about the difference in resolution values for Gyroscope, Accelerometer, Reference Altitude, Reference Position, GNSS Altitude, and GNSS Position data.
Last Updated: Aug 19, 2020
Regular Versus High Resolution Data Read More »
Measuring Linear Accelerations from External Monitoring Point
Purpose: To instruct the user on what settings need to be configured such that one can monitor linear accelerations from an external monitoring point near, or around the INS.
Last Updated: February, 2020
Measuring Linear Accelerations from External Monitoring Point Read More »
Which Magnetometer Calibration Method is Right for My Device?
Purpose: The Inertial Labs INS has five methods of hard and soft iron calibrations for heading calculations.
Last Updated: October 2019
Which Magnetometer Calibration Method is Right for My Device? Read More »
Maximum Cable Length vs. Data Rate
Different cables and their corresponding maximum data rate with cable length are used. Values are based on estimated ideal conditions.
Last Updated: February 2020
Maximum Cable Length vs. Data Rate Read More »